The Official release is ready in our download area.


Please follow the instructions careful on the above page.


The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the
Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0
----------------------

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.0
-----------------

v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.


SAMs V 2.0.8.0
---------------

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.


SeDBx v2.0.8.0
---------------

DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver


SeDBx Quick Guide has been updated.

The Official release is ready in our download area http://sarunasoftware.com.

Since this is a MINOR release there is NO need to update your HWK, there is also NO need to remove HWK Suite v2.0.7.x

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.7.2
----------------------


1. New DCT4+ versions support:
1200b(RH-100 v5.06)2600c(RM-340 v561)

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

SAMs V 2.0.7.2
---------------

TRIDENT
B100,B108,B200,B300,S710i added (DUNL,IM,FL)
B100,U600,U600B MSL Repair introduced.
OM(SYSOL)
C420,C420L,C421,C425,C426,X560,X560L,X566
added (DUNL,IM,FL,SECT)
SWIFT
E747.F250,F258,J700 added (DUNL,FL,SECT)
Chinese FOTA products E838, J708 flashing.
Added sectors count for RAW NAND read.
COMMON INFO
Product filter added.

SeDBx v2.0.7.2
---------------

1. USB Flashing introduced.
2. CID53 Support for DB2020 and PNX5230 platforms.
3. CID Upgrade introduced.
4. FS Upgrade files flashing. (FSUPG)
5. GDFS Info now Displays User Lock code for DB2012 models also.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.

The Official release is ready in our download area http://sarunasoftware.com.

Since this is a MINOR release there is NO need to update your HWK, there is also NO need to remove HWK Suite v2.0.7

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.7.1
----------------------

1. New BB5 products: RM-337,RM-364,RM-365,RM-366,RM-451
(6300i,3120c-x,8800e-5)
2. New DCT4 products: RM-340,RM-341,RM-362,RM-363
(2600c-2,2600c-2b,5000d-2,5000d-2b)
3. Flash Update pack (8.6.1.31560) added.
4. New RAP, UPP ASIC's and FLASH Chip's support.
5. New DCT4+ product unlock (see corresponding list)
6. BB5 ASK file will be created during "Rd Cert"

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.

The Official release is ready in our download area http://sarunasoftware.com.

Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


NOTE: Support Access is via the software modules only, download managers have been limited to 3 connections.


UFS_DCTxBB5 v2.0.7
--------------------

1. New BB5 products:
RM-179,RM-223,RM-233,RM-244,RM-256,RM-264,RM-269,RM-278,RM-279,
RM-313,RM-314,RM-320,RM-321,RM-322,RM-323,RM-397,RM-421,RM-426
(N81-1,N81-3,8800e-1,E51-1,N81-5,7900d-1,N81-6,6500s-5,5610d-5,N82-1,
N82-2,N95-2 8G,N95-6 8G,6301,6301b,6500c-5,N95-4,E51-2)
2. ISM flashing support for BB5 products.
3. Improved DCT4/WD2 Flash Loaders version display.
4. Fixed BB5 PM file open bug.
5. Improved Extended PHONET messages handling.
6. Store of Ext.VPP setting in INI file.
7. Support of new Flash Chips.
8. Fixed CNT flashing for 7370 and 6151.
9. Flash Update pack (7.46.43.30662) added.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. This has always been the case with 7 pin cables, but from this release 7 pin cables are supported by UFS+HWK.

UFS_LG_GSM v2.0.7
-------------------

1. KG280, KP200, KP202, MG280 support added.


UFS_SAMs v2.0.7
-----------------

TRIDENT C170,C178,C188,E210,E218,E840B,E848,E870,E878,E888 ,E958,
F210,F218,P520(Armani),M608,T519,T629,U600B,U608B added.
OM(SYSOL)
C160,C160B,C160L,C160M,C166,C168,C180,C450,C458,CC 03,
M110,X540,X550 added.
E2P unlock fixed for E420,E428...
Implemented MSL calculation, allows direct unlock
without E2P corruption and shows correct codes.
Rebuild of corrupted Master Key during wrong unlock.
IMEI rebuild for new models (Sysol3)
SWIFT
D880,D888(Duos),E746,G608,L600,L608,M610,M618 added.
Implemented MSL calculation, allows direct unlock, and
show correct codes, without any data lose or setting to
default values of MSL, BTID, IMEI or Radio settings.
E2P Sections Read/Write introduced (compatible with TAT)
IMEI and BTID rebuild.(Imei option for Swift_1 only now)
Fixed bug of 0 length TFS files flashing (affected:
java appletts in D880, E200, E250, G600, M610 products)
COMMON INFO
E2P(hee)sections R/W allows to transfer calibration data,
radio setttings, etc. from product to product, without
damage to other vital data, unlike E2P or FULL clone.
Or allows to Read-Edit-Write well known values.
Warning,
Access to some sections can be denied by firmware, or
can have different values dependand on firmware version.
In case of protected or none existing section will have
result length of 0 or lose of TAT mode.

The Official release is ready in our download area http://sarunasoftware.com/cardmain.php?dir=HWK_SW/.

Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!! If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk. New Users or users who un-installed the old version, should download and install the HWK Support Suite and run the client, before trying to install the full HWK Suite

1. "Skip Info Checking" allows reflash dead phones.
2. "Support" button, to access support site.

COMMON
Remade user interface.
"Support" button, to access support site.
TRIDENT
E950,F200,J600,J600E,J608,U300,U308,X830N added.
Read Codes for J600,J600E,J608
SWIFT
E598,E768,G600 added.
Unlock Codes on Info for D820,D900,E250,E740,G600.

1. KG290 support added.
2. "Support" button, to access support site.

1. Dual Line flashing for BB5 introduced (Required UFS firmware V2.8 2007)
2. All avalaible phones supported (including RAPIDO v1.12, v1.13)
3. "Verify" function for BB5 added.
4. Latest Flash Update pack (7.40.35.29728) supported.
5. Support of Muxed Nand.

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. This has always been the case with 7 pin cables, but from this release 7 pin cables are supported by UFS+HWK.

1. Infineon SuperGold2 models unlock (KE850,KE970, ...)
2. KE970GO added (KE970G)

TRIDENT
C520,M300,M600,X526 added.

1. DB2020 User Lock code reset to 0000.
2. GDFS Info (Displays User Lock code for non DB2020 models)

New Support Area Access - All you need is an Original HWK who's HID is in the master database (can be updated with update client), no username, no password, no waiting for activation. - We hope you will all enjoy this small gift and it will make ours and our customers lifes easier

LG_GSM V 2.0.5.6
-----------------
1. API Updated to allow support access (No user update)


SAMs V 2.0.5.6
---------------
1. API Updated to allow support access (No user update)


SeDBx V 1.0.5.6
---------------
1. Initial Public Release - This module will be updated over the next few weeks to become inline with the rest of the HWK Suite of Modules.

1. Fixed support of Spansion MirrorBit Flash chips.
2. Infineon SuperGold2 models added (KE850,KE970, ...)
3. Infineon EgoldVoice models added (KG270,KG271,...)
Warning Infineon models works with battery only !
4. Mediatek models added (C2500, C2600, ...)

TRIDENT
E840,F300,F308,U100,U108 added.
Full Reset(*2767*3855#)is mandatory after flashing !
If make Asia<>EU change, use *2767*3855# before flashing.
SWIFT
D900i,D908i,E200,E208,E390,E398,E590,E740,E830,E83 8 added.

TRIDENT
U600,U608 added.
"Test Mode" enter improved.
Warning about Battery usage, during UI operations.
Corrected Reserved Regions for some models(D83x,D84x,E90x,P31x,X82x)
Added MSL calculation, allows direct unlock and show correct codes for new models(D83x,E570,E90x,P31x,U60x,X5xx,X63x,X68x,X8x x,.)
IMEI challenger implemented, allows rebuild IMEI for new models.

1. Modified BB5 codes enter, to allow unlock "Counter Expired".

1. Added BB5 files integrity check, while flashing.
2. Fixed some minor bugs in "Init SimLocks".
3. Added Dejan solution for BB5 ("Locks") 6630,6680,6681,n70,n90 etc... Test others on your OWN risk!

1. Revised "Init SimLocks" function, now allows direct unlock of 1600(RH-64,RH-65)and other models.'

1. New BB5 products: RM-101,RM-188,RM-208,RM-260 (N92-2,6086,E65-1,6086b)
2. New DCT4 products: RH-94,RH-95,RH-97,RH-98,RM-225.RM-229
(1112,1112i,6060v,6061,6030b,6030)
3. New CDMA products: RH-71,RH-77,RH-89,RM-121(2125,2126i,2118,2115i,2355)
4. New CDMA TIKU products:
RM-41,RM59,RM-60,RM61,RM-66,RM-124,RM-125,RM-154,RM-193
(3155,3155i,6155,6235,6236i,3152,6265,6265i,2855,6 165,6275,2865)
5. Support of new Flash update pack 7.4.13.26017, new Flash chips added.
6. Improved F-Bus polling, fixed "Bad Resp UFSx" after fatal error.
7. Improved diagnostics of "Dead APE" and not recognized Flash chips.
8. Fixed "Patch" option bug.
9. UDA(CP) flashing for RM84,RM99 (N70-1,N70-5)
10.Self Tests monitor introduced.
11.Unlock of DCT4+ (BB4.1 ASIC 2 & 11) phones.
12.Certificates backup for BB5 phones introduced ("Rd Cert"and"Bk.308"for SL_Data)
13.BB5 File System Format introduced.
14.Windows Vista(tm) 32bit OS support.

1. KG110, KG320 support fixed.
2. Added new models.
3. Windows Vista(tm) 32bit OS support.

COMMON
Windows Vista(tm) 32bit OS support.
Cut Power option (Restart - power on mobile)
TRIDENT
C140,C216,C240,C250,C260,C266,C268,C308,P310,P318, X166,X636 added.
MSL1 bypass, allows direct unlock.
OM635x
E635 added.
SWIFT
E256,E376,E480,E488,E736,E750,E758 added.
E25x direct unlock.
Full TFS Read, TFS editor.
Option to exclude E2P part from MCU read.

All other modules have been updated to include Windows Vista(tm) 32bit OS support.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 or V3.0.4.1, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION

This installer contains a new Update Client (v2.0.4.2) which will fix a "1112 exception error" which some users have had. There is no need to perform the server part within the client to fix the 1112 error, e.g. Next, Wait..., Quit is enough.

DCTxBB5 v2.0.4.2
-----------------

1. New BB5 products: RM217,RM222 (6300,6300b)
2. PM Write: cofirmation to overwrite security data (21,120,208,308)

SAMs v2.0.4.2
--------------
COMMON
Cables description added.
TRIDENT
MVN CTS flashing fixed (X830 'Unknown File System' error)
FDI CTS flashing fixed (E570,X630,X680 Empty folders)
Full Reset (*2767*3855#) is mandatory after CTS flashing !
X838 added.

The Official release will be ready in our download area www.gts-box.org/support.php

Mirror link

Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:- Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_DCTxBB5 v2.0.4
--------------------

1. New BB5 products:
RM43R,RM100,RM140,RM146,RM147,RM158R,RM174,RM181,R M209,RM291
(N91-2,N92-1,7390,5300,5300b,N91-6,5200,5200b,7373,2626) introduced. 2. RM170,RM171(E50-1,E50-2) fixed.
3. New Flash update bundle support (6.44.047)

UFS_LG_GSM v2.0.4
-------------------

1. M4410 support added.
2. UI functions added for LG models.
3. Added BIF->MOT, BIN->MOT conversion.

UFS_SAMs v2.0.4
-----------------

TRIDENT
C300,D830,D836,D838,D840,D848,E570,E906,S401i,X156 ,X160, X160b,X168,X461,X481,X510,X518,X520,X530,X680N,X81 0,X818, X830 added (Unlock works with battery only !)
SWIFT
E250,E258,E500,E780,E786,E788 added.
Direct unlock for new models (D900,D820...)
OM635x
E420,E428 added.
X65x - Unlock E2P feature added.
S50x - Fixed "Full" flashing bug, E2P R/W added.

UFS_DCTxBB5 v2.0.3
-------------------
1. New Flash update bundle support (6.35.036)
2. Fixed bug in MM_Erase for TIKU models RM-165 (8800d)
3. Improved path search routines.

UFS_LG_GSM v2.0.3
-------------------
1. KG210,KG220,KG221,KG225,KG240,KG245 support added.

UFS_SAMs v2.0.3
-----------------

TRIDENT
I300,I308,I320,X680,X688 added.
CTS flashing (D520,D528,X680,X688)

SWIFT
E370,E378,E380,E388 added.
Introduced Unlock E2P for MSL phones (D900,D820,E370,...)
Read E2P shows info (IMEI, Lock Status, Unlock Codes)

Please Note: I300 / I320 PDA Flash is also supported by a third party utility, check the start menu after install.

The Drivers are installed to:-

\Program Files\SarasSoft\UFS\UFS_SAMs\PDAFLASH_I3xx\Driver\ or your localised path for none english windows.

The Official release is ready in our download area www.n-box.org.

New cable schema's are included with the installer, check Start Menu\Programs\SarasSoft\UFS\Documents.

UFS_DCTxBB5 v2.0.2
--------------------

1. New BB5 products: RM67,RM86,RM87,RM106,RM112,RM123,RM132,RM133,RM145 ,RM199,RM200 (N71-1,6136,5500d,5500,N71-5,6233,N73-5,N73-1,6234,6136b,6151) introduced.
2. New DCT4 ASIC support added.
3. New DCT4 products RH86,RM165 (2610,8800 Sirocco)
4. Fixed VPP control.
5. Fixed support of new Flash update packs. (Flash Pack v6.32.029 included.)
6. Fixed minor bugs.

UFS_LG_GSM v2.0.2
-------------------

1. Sharp Gsm products added: GX20,GX30,GX30i,TM100,TM150,TM200

UFS_SAMs v2.0.2
-----------------

COMMON
Introduced E2P Read/Write. Allows easy backup/edit E2P
areas to repair or rebuild CAL data for new models.(Locks etc...)

TRIDENT
C130,E900,E908,S500i,X210,X218,X500,X508,X630,X638 ,X820,
X828 added (Unlock works with battery only)
CTS flashing (E900,E908,X630,X638,X820,X828)

SWIFT
D900,D908,X670,X678 added.
Corrected problems with TFS read.
NOR Erase.
Direct unlock for older models.

OM635x
X650,X658 added.
NOR Erase.

UFS_ATRz v2.0.1
-----------------

1. Fixed "Wait..." bug for J200,J210,Z200.

UFS_DCTxBB5 v2.0.1
--------------------

1. Corrections to handle 64->128 conversion for new softwares.
2. New flash chips supported (Amd,Spansion,Intel,ST)
3. Bugs in PM_Edit fixed.
4. 64->128 conversion for BB5 phones.
5. New BB5 GSM products: RM10,RM24,RM89,RM180 (E70-1,E70-2,E61-1,N72-5)
UFS_LG_GSM v2.0.1
-------------------

1. New products added (S5200,KG800,..)
2. New flash chips support added.
3. Multiregion files fixed for ADI.
4. Fixed read bug ("not Defined Region")

UFS_SAMs v2.0.1
-----------------

TRIDENT
S400i added (Unlock works with battery only)
SWIFT
E360,E368 added. UFS_DCTxBB5 v2.0.0
--------------------

1. New BB5 GSM products: RM-49,RM-78,RM-79,RM91,RM92,RM-115,RM-126 (E60,6280,6282,N80-5,N80,6131/6133,6126/6133b) introduced.
2. New DCT4 products: RH65,RH69,RH86,RH87,RH92,RH93,RM9,RM33,RM83,RM161, RM162, RM166,RM167,RM189 (1600b,1110b,2610,2610b,1112b,1112,7270b,8801,6112 ,6103,6102i, 6070,6070b,2310)
3. Fixed PM_Edit, to show BB5 security code.
4. North America BB5 product: RM-99 (N70-5) introduced.
5. Fixed RM-38 (3250) flashing.
6. CDMA products RH-66,RM-97 (2115i,2116,2116i,2255) introduced.

UFS_LG_GSM v2.0.0
-------------------

1. Automatic MOT to BIF conversion.
2. New products added.
3. Fixed T5100 flashing.

UFS_SAMs v2.0.0
-----------------

TRIDENT
C120,C128,D520,D528,D800,D808,E770,E880,P300,P308, X300,X308 added.
Read Flash - custom address range save fixed.
OM635x
X490,X495,X497 TFS flashing fixed.
SWIFT
D820,D828 flashing added.
Please run the upgrade client after you have installed the software, follow the instructions careful as you may need to run the update client more than once.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

UFS_ATRz v2.0.0
-----------------

1. Added support for J220,J230,Z300.

UFS_DCTxBB5 v2.0.0
--------------------

1. New BB5 GSM products: RM-49,RM-78,RM-79,RM91,RM92,RM-115,RM-126 (E60,6280,6282,N80-5,N80,6131/6133,6126/6133b) introduced.
2. New DCT4 products: RH65,RH69,RH86,RH87,RH92,RH93,RM9,RM33,RM83,RM161, RM162, RM166,RM167,RM189 (1600b,1110b,2610,2610b,1112b,1112,7270b,8801,6112 ,6103,6102i, 6070,6070b,2310)
3. Fixed PM_Edit, to show BB5 security code.
4. North America BB5 product: RM-99 (N70-5) introduced.
5. Fixed RM-38 (3250) flashing.
6. CDMA products RH-66,RM-97 (2115i,2116,2116i,2255) introduced.

UFS_LG_GSM v2.0.0
-------------------

1. Automatic MOT to BIF conversion.
2. New products added.
3. Fixed T5100 flashing.

UFS_SAMs v2.0.0
-----------------

TRIDENT
C120,C128,D520,D528,D800,D808,E770,E880,P300,P308, X300,X308 added.
Read Flash - custom address range save fixed.
OM635x
X490,X495,X497 TFS flashing fixed.
SWIFT
D820,D828 flashing added.
Please run the upgrade client after you have installed the software, follow the instructions careful as you may need to run the update client more than once.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

N-Box Saras Soft

v1.4_e
-----------
1. New BB5 GSM product: RM-70 (7370) introduced.

v1.4_x
------
TRIDENT
D720,D730,X660,X668,X800,X808 added.
OM635x
X490 added.
SWIFT
X700 added.

Welcome to GTS-Box website